23
7. Maintenance
DANGER
DANGER OF ACCIDENT DUE TO MAINTENANCE NOT BEING PERFORMED OR NOT BEING
PERFORMED ON TIME!
If maintenance is neglected, worn components can lead to accidents.
• The maintenance activities and intervals specified in this user manual must be observed.
• The annual inspections must be performed by your dealer.
The following maintenance activities must be performed at the specified interval.
Component Activity monthly* annually* other / remark
Screw connections Check, retighten if necessary X
see „Torques“
Lacquer, metal
parts
Preserve
3 months
Seat post
Dismount and lubricate,
check screw connection
X
Suspension seat
post
Check for play X
Brake
Inspection of brake discs,
brake pads and brake system
see „5. Activities before
and after the ride“
Gears
clean and lubricate X
Remove and grease shift/
brake cables
X
Pedals Check bearing play X
Crank Check, tighten X
Crankset Check bearing play X
Headset bearing
Check bearing play X
grease X
Hub bearing
Check bearing play X
grease X
Chain Check / replace 2000 km
Belt Check tension and wear X
Handlebar
Disassemble handlebar,
remove grips and control
elements, inspect or replace
handlebar for damage and
nicks, etc.
X
replace after 5 years or
after a crash
Stem Disassemble and grease X
Tires Check tread and tire sidewalls X
Wheels
Check run-out and spoke
tension
X
Check rim wall thickness X
To Next Page
Loading...