Simpson 229-2 User Manual

Model 229 Series 2
Leakage Current Tester
OPERATOR’S MANUAL

Simpson 229-2 Specifications

General

Category	Analog Multimeter
AC Voltage Ranges	10V, 1000V
DC Current Ranges	50µA
Input Impedance	20, 000 Ohms/Volt DC, 5, 000 Ohms/Volt AC
Display Type	Analog
Resistance Ranges	Rx1, Rx100

Summary

1. INTRODUCTION

1.1 Why Measure Leakage Current?

Explains the purpose of measuring leakage current for electrical safety and hazard prevention.

1.2 Threshold Of Perception

Defines the perception threshold for electrical current as a basis for leakage current limits.

1.3 Technical Data

Provides key specifications, functions, ranges, and accuracy of the leakage current tester.

1.4 Items And Accessories

Lists the items furnished with the instrument, including test leads and batteries.

2. OPERATION

2.1 Safety Precautions

Outlines critical safety measures and precautions for operating the leakage current tester.

2.3 Operating Instructions

Provides step-by-step guidance for performing leakage current measurements safely and accurately.

3. MAINTENANCE

3.1 Warranty

Details the warranty policy for the Simpson Electric Company instruments.

3.2 Shipping

Provides instructions for packing, insuring, and shipping the instrument.

3.3 Battery Replacement

Explains the procedure for replacing the 9V battery when indicated by the instrument.

3.4 Calibration

States that calibration is a factory service and how to arrange for it.

3.5 Care

Offers recommendations for daily, quarterly, and annual care of the instrument.