Need help?Do you have a question about the Simpson 260 series 5 and is the answer not in the manual?
General| Brand | Simpson |
|---|---|
| Model | 260 series 5 |
| Category | Multimeter |
| Language | English |
Describes the meter, controls, and circuit jacks on the front panel.
Details the 12-position range switch for various measurements.
Explains the function switch for DC, +DC, and AC modes.
Describes the control for setting the ohmmeter zero point.
Information on the handle's positioning for easy viewing.
Covers test lead construction, usage, and inspection.
Details fuse and overload protection mechanisms.
Lists accuracy and sensitivity for AC voltage measurements.
Lists accuracy and sensitivity for DC current measurements.
Lists accuracy for resistance measurements.
Lists accuracy for AF output voltage measurements.
Advises on safe practices for making measurements.
Steps to properly zero the meter pointer before use.
Warning regarding potential damage on the 0-250mV range.
Cautionary note for measurements on the 5000V DC range.
Step-by-step guide for measuring AC voltages.
Instructions for measuring output voltage using the dedicated jack.
Detailed instructions for zeroing the ohmmeter.
Caution and procedure for measuring 0-50 microamperes.
Procedure for measuring direct currents up to 10 amperes.
Guidance on observing polarity during battery replacement.
Explains the role of rectifiers in AC measurements.
Steps for replacing resistors on the printed circuit board.
Procedure for accessing the printed circuit board.
Describes how to test capacitors using the ohmmeter.
Information on accessory DC high voltage probes.
To Next Page