Need help?Do you have a question about the SIMS GRASEBY 3400 and is the answer not in the manual?
Lists dimensions, weight, AC supply, battery, syringe brands, flow rate, and accuracy.
Explains how to access and set parameters like syringe brand, language, and rates.
Details accessing diagnostic mode for viewing software version, CRC, and pump status.
Describes methods for measuring occlusion and syringe stiction, including formula.
Outlines procedures for checking and adjusting the pump's occlusion thrust levels.
Lists fault codes, their meanings, and recommended troubleshooting actions.
Step-by-step instructions for replacing main, regulator, umbilical, and opto sensor boards.
Details replacing leadscrew, motor, clamp assemblies, and other mechanical parts.
Verifies syringe size detection, clamp alignment, and specific alarm conditions.
Checks pump's accuracy in delivering volume and its occlusion pressure settings.
Step-by-step guide for converting the pump to use Braun Perfusor 50 ml syringes.
General| Type | Syringe Pump |
|---|---|
| Manufacturer | SIMS Graseby |
| Model | 3400 |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Syringe Sizes | 5 ml, 10 ml, 20 ml, 30 ml, 50 ml |
| Occlusion Pressure | Up to 800mmHg |
| Battery Life | 8 hours |
| Alarms | Occlusion, Low Battery, Syringe Empty |
| Accuracy | ±2% |
To Next Page