SINAMICS G120
Standard inverters 0.37 kW to 250 kW (0.5 hp to 400 hp)
Supplementary system components
Basic Operator Panel BOP
4/104
Siemens D 11.1 · 2009
4
■
Overview
The Basic Operator Panel BOP can be used to commission
drives, monitor drives in operation and input individual parame-
ter settings.
Values and units are displayed on a 5-digit display.
One BOP can be used for several inverters. It is plugged directly
onto the CU240 Control Unit.
The BOP provides a function to quickly copy parameters. A
parameter set of an inverter can be saved in the BOP and then
downloaded to another inverter.
Note
: The BOP is not suitable for the CU230P-2 Control Unit. The
Intelligent Operator Panel IOP is available for this purpose.
■
Selection and ordering data
■
Integration
Example: CU240E Control Unit with mounted Basic Operator Panel BOP
Order No.
Basic Operator Panel BOP
(not for Control Unit CU230P-2)
6SL3255-0AA00-4BA1
To Next Page
Loading...