SINAMICS G120
Standard inverters 0.37 kW to 250 kW (0.5 hp to 400 hp)
Supplementary system components
Shield Connection Kit
4/111
Siemens D 11.1 · 2009
4
■
Overview
The adapter for DIN rail mounting can be used to mount inver-
ters, frame sizes FSA and FSB on DIN mounting rails (2 units
with a center-to-center distance of 100 mm).
Furthermore, the motor cable shield connection and other cable
shields required for mounting inverters on DIN rails comply with
the same standards for emissions and conducted emissions as
if the inverter were directly installed in a control cabinet.
The adapter for inverter frame size FSA can be used to mount
converters singly or with matching line filter.
The adapter for inverter frame size FSB can be used to mount in-
verters with or without an integrated line filter.
■
Selection and ordering data
■
Overview
Example of Shield Connection Kit for Power Module frame size FSB
The Shield Connection Kit
• makes it easier to connect the shields of supply and control
cables
• provides mechanical strain relief
• ensures optimum EMC performance
• is used to attach the Brake Relay and Safe Brake Relay
The Shield Connection Kit includes
• a shield bonding plate for the required Power Module
• a shield bonding plate for a CU240 Control Unit
• connection elements and clamps for mounting
• mounting device for Brake Relay or Safe Brake Relay – frame
sizes FSB to FSF
■
Selection and ordering data
Adapter for mounting on DIN rails Order No.
• for Power Module frame size FSA 6SL3262-1BA00-0BA0
• for Power Module frame size FSB 6SL3262-1BB00-0BA0
Shield Connection Kit Order No.
• for PM240/PM250 Power Modules
- Frame size FSA 6SL3262-1AA00-0BA0
- Frame size FSB 6SL3262-1AB00-0DA0
- Frame size FSC 6SL3262-1AC00-0DA0
- Frame sizes FSD and FSE 6SL3262-1AD00-0DA0
- Frame size FSF 6SL3262-1AF00-0DA0
• for PM260 Power Modules
- Frame size FSD 6SL3262-1FD00-0CA0
- Frame size FSF 6SL3262-1FF00-0CA0
Supplementary system components
Adapter for mounting on DIN rails
To Next Page
Loading...