DC INVERTER U-MATCH AIR CONDITION MAINTENANCE
156
2. Remove the front side
plate
? Use screwdriver to loosen
the screws fixing the front
side plate.
? Remove the front side
plate from the unit.
3. Remove the rear side
plate
? Use screwdriver to loosen
the screws fixing the rear
side plate.
? Remove the rear side
plate from the unit.
4. Remove the grill
? Use screwdriver to
remove the screws fixing
the grill.
?Remove the grill from front
panel.
5. Remove the front panel
? Firstly, use screwdriver to
remove the screws on the
four sides of the front panel.
? Remove the front panel
from the unit.
To Next Page
Loading...
