Sinclair ASGE-18AI - 2.2 Dry Mode

DC INVERTER U-MATCH AIR CONDITIONERS CONTROL
2.2 Dry Mode
The dry mode is basically same as cooling mode. The difference is that:
The indoor fan is fixed at low speed. ①
② Max. capacity output: A×90%
Compressor
Outdoor fan
Indoor fan
(cooling)
4-way valve
Capacity demand >0
Dry Mode
Max. capacity output: A×90%
480 steps
6
0
sec.
150 sec.
30 sec.
3 min.
3 sec.
Send out switch-off command
Acc. to
control logic
Acc. to
control logic
150s after the compresso
r
is stopped
Firstly switch off to step 0
and then switch off step 60.
Send out dry command
X steps