DC INVERTER U-MATCH AIR CONDITIONERS INSTALLATION
Figure 1-1-1 Figure 1-1-2
Figure 1-1-3
4 Install the hanger onto the indoor unit as Figure 1-1-2 and Figure 1-1-3 shows.
5 Install the indoor unit at the ceiling as Figure 1-1-5 shows.
Nut
Hanger
Screw
mm
I Enlargement
Return
air
Supply air
Figure 1-1-5
6 Precautions for unfavorable installation:
The preparation of all pipes (connecting pipes and drainage pipes) and cables (connecting lines of
wire controller, indoor unit and outdoor unit) must be ready before the installation, so as to achieve
smooth installation.
Drill an opening on the ceiling. Maybe it is required to support the ceiling to ensure the evenness of
it and avoid the vibration of it. Consult with the user or a construction company for details.
In case the strength of ceiling is not enough, use angle iron sections to set up a beam support.
Place the unit at the beam and fix it.
To Next Page
Loading...
