Open the front panel ,Push the filter upwards to
unloose the clasp, and then pull out the two filters.
Screw off the screws fixing the electric box cover
remove the cover out.
Front Pane
(18/24) Disassembly procedures for indoor unit
1. Disassemble the front panel, Filter, Electric
box cover
Filter
Bend the guide louver so that the movable
lock of guide louver is released to remove the
guide louver.
2. Disassemble the guide louver
Screw
Operating Procedures / Photos
Screw
Protect board
Guide louver
Open the 3 screw covers at the front case and
screw off 5 screws. Pull out the movable latch at
the front case with hand and then pull it back-
wards to disassemble the front case.
3. Disassemble the front case
Electric box cover
To Next Page
Loading...
