Unsolder the pipeline connecting with valves ( to
prevent soldering gun from burning out the
chassis).Unscrew 2 bolts fixing gas valve ,and
then unsolder the weld spot between pipeline and
gas valve to remove gas valve. Unscrew the 2
bolts fixing liquid valve, and then unsolder the
weld spots between pipeline and liquid valve to
remove liquid valve.
(Note:During unsoldering ,wrap the valves with
wet cloth to avoid damage for high temperature.)
7. Disassemble Gas and Liquid Valves
Bolts
Liquid Valve
Gas Valve
8. Disassemble Axial Flow Fan
Unscrew the nut fixing the fan with a spanner to
take out the fan.
9. Disassemble Outdoor Motor
Unscrew the screws fixing the motor support, and
then lift it upwards to remove it. Unscrew the
screws fixing the motor and pull out the connec-
tion line between it and electric box to remove it.
Nut
Motor
Terminal Screw of Motor
Motor Support
Screws
Axial Flow Fan
Operating Procedures / Photos
To Next Page
Loading...
