20
HYSTERESIS TEMP.
SERVICE MENU
2 C
OK
CAP ADJUST CYCLE
SERVICE MENU
180S
OK
ANTI-FREEZING TEMP. OF NORMAL
TEMP. OUTLET WATER
SERVICE MENU
2 C
OK
Press the "▼" and "▲" buttons to adjust the
parameter, and press the "OK" button to save
the setting and return to the previous interface.
Press the "BACK" button to cancel the setting
and return to the previous interface.
e. Capacity adjust cycle:
Select "CAP ADJUST CYCLE", and press the
"OK" button to enter the interface. The
interface display is as follows:
Press the "▼" and "▲" buttons to adjust the
parameter, and press the "OK" button to save
the setting and return to the previous interface.
Press the "BACK" button to cancel the setting
and return to the previous interface.
f. Hysteresis temperature:
Select "HYSTERESIS TEMP", and press the
"OK" button to enter the interface. The
interface display is as follows:
Press the "▼" and "▲" buttons to adjust the
parameter, and press the "OK" button to save
the setting and return to the previous interface.
Press the "BACK" button to cancel the setting
and return to the previous interface.
g. Anti-freezing temperature of normal
temperature outlet water:
Select "ANTI-FREEZING TEMP OF NORMAL
TEMP OUTLET WATER", and press the "OK"
button to enter the interface. The interface
display is as follows:
To Next Page
Loading...
