Sincro SK 225 - User Manual

Manuale di Uso e Manutenzione
Use and Maintenance Manual
SK 225
0900242 - REV 00 - 12/2009

Summary

1. SAFETY RECOMMENDATIONS

2. INTENDED USE

4. OPERATING PRINCIPLE AND CHARACTERISTICS OF THE VOLTAGE REGULATOR SYSTEM

5. GENERAL MECHANICAL AND ELECTRICAL SPECIFICATIONS FOR COUPLING WITH ENGINE

6. INSTALLATION

6.2 Mounting on engine

6.2.1 Assembling shape IM B35

6.2.3 Assembling shape SAE

6.3 Earthing

6.4 Preliminary Controls

6.4.1 Control of electrical insulation

Procedure for testing the generator's electrical insulation resistance.

6.4.3 Control of voltage and frequency

6.4.4 AVR board settings

Instructions for adjusting the Automatic Voltage Regulator (AVR) settings.

6.4.6 Initial start-up

7. AFTERSALES ASSISTANCE AND MAINTENANCE

7.3 Troubleshooting

7.4 Removal and replacement of components and component assemblies

7.4.1 Extracting and inserting the rotor

Detailed steps for rotor removal and reinstallation.

7.4.2 Changing bearing

Instructions for replacing generator bearings.

7.4.3 Changing rotating diodes

7.4.4 Changing exciter rotor

11. WARRANTY

Sincro SK 225 Specifications

General

Rated power (kVA)	2.2
Rated voltage (V)	230
Frequency (Hz)	50
Fuel Type	Petrol
Noise Level	68 dB(A) at 7 m
Outlets	1x 230 V, 1x 12 V DC