Sinee EM100-1R5-3B User Manual

User Manual
EM100 Mini Inverter
1
Preface
Thank you for purchasing EM100 series mini inverter.
Document No.: 31010008
Version No.:103
Issue Date: 06/03/2013
EM100 mini inverter is a compact, intuitive, reliable and performing AC variable speed
drive for 3-phase induction motors.
This manual offers the general information of installation, wiring, function parameters,
daily maintenance, and fault diagnosis of EM100 mini inverter.
It is the duty of any user to perform the appropriate, correct installation or configuration
of the optional parameters of the devices. Neither SINEE nor its distributors shall be
responsible or liable for misuse of the information contained herein or mismatching the
inverter with the motor.
In the interests of commitment to a policy of continuous development and improvement,
SINEE reserves the right to update the specification of the product or its performance, or
the content herein without notice.
More updates and information are available at www.sinee.cn.

Sinee EM100-1R5-3B Specifications

General

Rated Power	1.5 kW
Output Power	1.5 kW
Efficiency	≥90%
Frequency	50/60Hz
Protection Features	Overload, Short Circuit, Overvoltage, Undervoltage

Summary

Safety Information

Safety Precautions

Details safety precautions for installation and operation of the inverter, including danger and caution.

Precautions

Overview

Technical Specifications

Details the technical specifications of the EM100 inverter, covering input, output, and control functions.

Overall and Installation Dimensions

Installation

Mechanical Installation

Covers recommendations, site considerations, precautions, and installation direction for mechanical setup.

Wiring

Provides detailed instructions and precautions for wiring the main circuit and control circuits.

Keypad Operation

Function Code Check and Editing Method

Explains the keypad operation modes and methods for checking and editing function codes.

Parameter Tables

Parameter Tables

Lists and describes various parameter groups: General, Motor, Input Terminal, Output Terminal, Start/Stop, V/F, Auxiliary, Fault, PID, Communication, User.

Parameter Description

General Parameters

Motor Parameters

Input Terminal Parameters

Output Terminal Parameters

Start/Stop Control Parameters

V/F Control Parameters

Auxiliary Function Parameters

Fault and Protection Parameters

Explains parameters for current limit, overvoltage stall control, motor overload, and fault retry.

Preset Speed and PLC Parameters

PID Parameters

Describes PID control parameters including reference setting, feedback, gain, and integration/differentiation times.

Communication Parameters

Covers parameters for communication settings like bit rate, format, overtime, and master-slave mode.

Troubleshooting

Fault and Corrective Action

Lists common fault codes, their causes, and recommended corrective actions.

Common Fault and Troubleshooting

Addresses common issues like parameter setting failures and abnormal motor operation.

EMC (Electromagnetic Compatibility)

EMC Guide

Maintenance and Inspection

Maintenance and Inspection

Details routine maintenance checks and periodic inspections for inverter longevity.