(2) Threading the Lower Looper (Yellow)
* Thread the lower looper as indicated ®
Pass thread from back to the front through the
thread guide ®.
* Insert thread down through the right hole.
* Bring thread up and insert through top of left hole
* Hold the thread above the tension disc to stabilize
it. (D-A
* Pass thread down through thread guide (3)—B.
* Pass the thread between the tension discs. (3)—C
* Pull thread up and over the top of the metal
Finger.®—D
* Pull thread down to make certain it is properly
threaded between the tension discs.
12
To Next Page
Loading...
