Singer 14 U44B/244B

To Previous Page

Form U6237 (992)

Part No. 379417-002

Printed in Japan

Main Page

Default Chapter5
- Default Chapter5
  - Table of Contents5
- 1 Accessories6
- 2 Needle Information6
- 3 Principal Parts7
- 4 How to Open Looper Cover8
- 5 Principal Parts Behind Looper Cover8
- 6 Preparation Prior to Sewing8
- 7 Setting up the Thread Guide Holder9
- 8 How to Remove and Insert Needle10
  - To Remove Needle (S)10
  - To Insert Needle (S)10
- 9 How to Remove Cylinder Cover11
10 How to Replace Cylinder Cover11
11 Threading the Machine12
- Threading Diagram12
- Understanding the Color Code12
- Stitch Diagram12
- To Thread the Machine Correctly12
- Important Threading Information19
12 Chaining off and Test Sewing20
13 Basic Stitch Types21
- Thread Overlock Mock Safety Stitch21
- Wide 3 Thread Overlock Stitch21
- Narrow 3 Thread Overlock Stitch21
14 How to Adjust Thread Tension21
- Suggested Tension Settings for 4 Thread22
- Overlock Mock Safety Stitch22
- Correct Balance of the 4 Thread22
- How to Balance the 4 Thread22
- Suggested Tension Setting for the 3 Thread Overlock Stitch23
- Correct Balance of the 3 Thread Overlockstitch23
- How to Balance the 3 Thread Overlockstitch23
15 How to Change Threads/Tie on Method24
16 How to Adjust the Stitch Length25
17 How to Disengage Movable Upper Knife25
- To Place Movable Knife in Nonworking Position25
- To Place Movable Knife in Working Position26
18 Seam Guide Lines26
19 How to Adjust the Overedge Seam Width27
20 How to Sew a Rolled Hem28
- Machine Set up28
- Suggested Tension Settings for Standard Rolled Hem29
- Suggested Tension Settings for Upper Looper Thread Wrapped Rolled Hem29
- How to Balance the Upper Looper29
- Thread Wrapped Rolled Hem29
- Additional Information about Rolled Hemming30
- To Secure the Rolled Hem Thread Chain30
21 Stitch Variations and Sewing31
- Techniques31
- How to Sew a Flatlock Decorative Seam31
- How to Sew an Overlock Blind Hem33
- How to Sew Pin Tucks33
- Turning Square Corners34
- Pin Placement35
- Securing the Thread Chain35
- Applying Elastic36
- How to Reinforce a Seam37
- Braiding by Chaining off37
- Differential Feed (with Differential Feed Machine Only)38
22 How to Adjust the Presser Foot Pressure40
23 Free Arm Sewing40
24 Relationship between Cloth, Thread and Needle41
25 Machine Maintenance42
- Cleaning the Machine42
- Oiling the Machine42
- How to Replace the Stationary Knife43
- How to Exchange Light Bulb44
26 Troubleshooting Chart45
27 Optional Accessories and Attachments46
28 Specification47

Singer 14 U44B/244B - Page 48

Table of Contents

Related product manuals