Need help?Do you have a question about the Singer 14U32A and is the answer not in the manual?
General| Type | Overlock |
|---|---|
| Number of Threads | 3/4 |
| Differential Feed | Yes |
| Free Arm | No |
| Needle Threader | No |
| Maximum Stitch Width | 6.7 mm |
| Stitch Types | Overlock |
| Stitch Length | 2 - 4 mm |
| Needle Type | Standard |
| Stitch Options | 3-Thread Overlock, 4-Thread Overlock |
| Presser Feet | Standard |
Components for the face plate and thread unwinder assembly, including screws and washers.
Parts of the tension dial mechanism: discs, springs, and nuts for tension adjustment.
Components of the front cover, thread guides, and related hardware.
Needle bar, looper mechanism parts, and associated linkages for sewing.
Parts of the movable and stationary knife assemblies, including levers and holders.
Components of the feed mechanism: crank rods, cams, and dogs for fabric feeding.
Motor, controller, pulleys, shafts, and electrical data plates.
Included accessories: needles, tweezers, and operator's guide.
To Next Page
