Need help?Do you have a question about the Singer 14U 34B/234B and is the answer not in the manual?
General| Type | Overlock |
|---|---|
| Maximum Stitch Width | 6.7 mm |
| Maximum Stitch Length | 4 mm |
| Differential Feed | Yes |
| Included Accessories | Needles, Screwdriver, Tweezers |
Diagram showing the sewing machine with its looper cover opened for access.
Instructions for extending the thread guide holder and positioning thread guides.
Step-by-step guide on how to open the machine's looper cover.
Procedure for safely removing the cylinder cover from the sewing machine.
Detailed guide on the correct sequence for threading the sewing machine.
Guidance on achieving proper thread tension for optimal stitch quality.
Tension settings specific to 1-needle, 3-thread overedge stitching.
Recommendations for fabric, needle, thread, and stitch length for rolled hemming.
Steps to replace the standard throat plate with a rolled hemming throat plate.
Instructions for performing the sewing operation for rolled hemming.
Instructions for achieving a gathered effect using differential feed.
Guidance on using differential feed for stretch overedge applications.
Details on performing ornamental stitching with three threads.
Procedure for creating a durable, nearly invisible hem finish.
Method for creating braided trims using chaining-off technique.
Instructions for creating decorative pin tucks with three threads.
Techniques for sewing neat square corners on fabric.
To Next Page
