To Next PageTo Next Page
Need help?Do you have a question about the Singer 14CG754 and is the answer not in the manual?
General| Differential Feed | Yes |
|---|---|
| Color-Coded Threading | Yes |
| Presser Foot Pressure | Adjustable |
| Speed | 1300 stitches per minute |
| Type | Serger |
| Stitch Formation | Overlock |
| Needle Threader | No |
| Number of Threads | 4 |
| Number of Needles | 2 |
| Maximum Stitch Length | 4 mm |
| Maximum Stitch Width | 6.7mm |
| Dimensions | 11.5" x 11.0" x 14.0" |
Details on extending and positioning the thread guide holder for proper threading.
Step-by-step guide on safely removing needles from the machine.
Instructions for correctly inserting new needles into the machine.
Visual guide illustrating the path of threads through the machine.
Explanation of the color-coded thread guides for easy threading.
Detailed procedure for threading the machine, covering all components.
Step-by-step instructions for threading the lower looper with yellow-coded thread.
Step-by-step instructions for threading the right needle with green-coded thread.
Step-by-step instructions for threading the left needle with blue-coded thread.
Key tips and procedures to ensure correct threading and troubleshoot common issues.
How to alter seam width by repositioning the needles.
Using the adjustment knob to fine-tune seam width for various fabrics.
Using differential feed to create gathered effects on fabrics.
Utilizing differential feed for sewing stretch fabrics with proper tension.
Steps to disengage the upper knife for specific sewing techniques.
Restoring the upper knife to its working position after use.
Instructions for attaching the spreader to the upper looper.
Procedure for detaching the spreader from the upper looper.
How to remove the cloth plate to convert the machine for free arm sewing.
Guide on reattaching the cloth plate after free arm sewing.
Setting the machine for standard overedge stitching operations.
Adjusting the machine for performing rolled hem stitches.
Recommended tension settings for 2-thread wrapped edge overlock stitch.
Guidelines for achieving correct thread tension balance for stitching.
Methods to adjust thread tensions for optimal stitch quality.
Recommended tension settings for 2-thread standard rolled hem stitching.
Recommended tension settings for 3-thread overlock stitch.
Recommended tension settings for 3-thread flatlock stitch.
Recommended tension settings for 3-thread wrapped edge overlock stitch.
Recommended tension settings for 4-thread ultra stretch mock safety stitch.
Steps for preparing the machine to sew rolled hems.
Technique for creating a decorative flatlock seam using tension adjustments.
Procedure for sewing a flatlock seam with fabric placed wrong sides together.
Method for sewing an overlock blind hem, suitable for knit wear.
Technique for sewing decorative pin tucks on fabric before cutting.
Guides for creating neat outside and inside square corners with stitches.
Guidance on placing pins safely to avoid damage to machine knives.
How to securely finish and fasten the thread chain after sewing.
Stabilizing seams by sewing with twill tape.
Creating braids by chaining off filler cords like yarn or twill tape.
Instructions for cleaning lint and debris from the sewing machine.
Points and procedures for periodic lubrication of machine parts.
Detailed steps for replacing a dull stationary knife.
Procedures for replacing the machine's light bulb.
