I6) 44hread Ultra Stretch Mock Safety Stitch I
Note: _ These are suggested tension settings oniy
Tensioin settings are effected by;
1) Type and thickness of fabric
2) Needle size
3) Size, type and ftber content of thread
• Set Each Tension Dial to Settings Shown at Right
and Test Sew on a Sample of Your Fabric
Howto Ba_anoe ....
" When the upper ioo_r thread ties on the underside
of the fabric;
o Turn the upper looper thread tension d_al
(orange) to a higher number.
- Or, turn lower looper thread tension dial (yellow)
to a lower number,
• When the lower [ee_r thread appears on the top
of the fabric;
- Turn tower looper thread tension dial (yellow)
toward a higher number
o Or, turn the upper looper thread tension dia_
(orange) toward a _ower number,
• When the lee needle thread tension is too loose;
- Turn the left needle thread tens{on dial (blue)
toward: a higher number
• When the r{ght needle thread tension is too _oose;
Turn the dght needle thread tension dial (green)
toward a higher number,
NEEDLE POSITION !
SEAM W_DTHFINGER KNOB S
STITCH _NGTH 2 ~ 4
U_;_ ioo_ _read
Right
thread
Topside
Fabr_ Ten,onmml
B!ue Gream0ra_ Ye!low
Ligh_we_ht 20 15 2_0 2,0
M_umwe_ht 25 2.5 , 2.0
Hea%v_ight
Upper i_,.et thm_
R_Jh_
_ad
need!e
thread
Lower
_per
_h.read
Tops_ Un_
R_ght
ne_|e
_read
To.de U_e_ide
35