How to Replace the Stationary Knife 1
Before replacing the stationary knife,
disconnect power line plug from the wail
receptacle.
The stationa_ knife shou{d be changed when it
becomes duH,
The stationary knife can be replaced according to
the directions provided, however if there are any
difficulties experienced, consult your Singer
representative to make the adjustments,
Be sure that the power fine plug is disconnected
from the electric source.
Open the _ooper cover and set the movable upper
knife 1 in the nonworking position (page 25)
Loosen the stationa_ knife set screw 2 and remove
the stationary knife 3.
• Ptace a new stationary knife in the groove of the
s_ationary knife hoider,
o Tighten stationary knife sef screw 2
• Return the movable upper knife 1 to its working
posiflon,
47
To Next Page
Loading...
