When the machine is completely threaded, bring aH
of the threads over the throat plate and siight|y to
the eft under the presser foot.
• Hoid the threads and apply a slight tension.
• Turn the hand wheei toward you 2 or 3 comptete
turns to sfart the thread chain,
• Lower presser foot,
Continue hoiding the chain and press on the foot
controlier until the chain is 5 ~ ?.Scm (2 _ 3 inches)
inlength.
Place fabric under the front of the presser foot and
sew a test sample
Note:: Do not pul_ on the fabric while sewing as this
may deflect the need e, causing ff to break.
29
To Next Page
Loading...
