Singer 14CG754 - 6. How to Open Looper Cover; 7. Principal Parts Behind Looper Cover; 8. Preparation Prior to Sewing

o
e
Caution ;
Be sure to turn off power switch.
Push the cover to the right as far as it will go 1
Pull cover down toward you 2
Caution:
Be sure looper covet is closed when sewing,
1 Upper looper
2 Movable upper knife
3 Presser foot
4 Stationary bwer knife
5 Lower tooper
6 Seam width finger knob
7 Seam width adjustment knob
Connect the controiier / eiectric plug 1 to the
machine reeeptacle 2
* Plug power line 3 into electde outlet 4,
" Power Switch: Push "-" mark side to turn °Of'J°.
Push _0" mark side to turn "OFF".
" To run the machine and control the speed, press
the contro!_e_.
* The harder you press, the faster the machine will
SeW
o To stop the machine from sewing, remove your foot
from the controller.
WARNING:
Be sure to make reference to °Warning" on
following page.
9