Singer 14CG754 - 18. Converting the Upper Looper into Spreader; Installing the spreader; Removing the spreader

Warning:
Switch off the machine before installing
er removing the spreader_
(Ins_lling the spreader
,, insert the pin (A) of the spreader in the
hole (B) of the upper looper.
• Put the positioning rib (C) {n contact
with the upper surface of the looper.
i insert the point (D)in the hole (E)
of the upper iooper
J
Removing the spreader
• Remove lhe point (O) of the hole (E)
of the upper looper and take the
spreader off the I_per.
Note: Put the spreader back to the
accessory storage.
C
B
26