4) 34hread Fiatlock 1
Note:, These are suggested tension settings on_y.
Tension settings are effected by:
1) Type and thickness of fabric
2) Needle size
3) Size, type and fiber content ef thread
• Set Each Tension Dial to Settings Shown at Right
and Test Sew on a Sample of Your Fabric
- When the lower looper thread tension istoo loose;
Turn the iower looper thread tension dial (yel!ow)
toward a higher number.
- Or, turn the needle thread tension dial (blue or
green) toward a iower number.
" When the upper iooper thread tension is too _oose;
Turn the upper _ooper thread tension dia{
(orange) toward a higher number.
o Or, turn the needle thread tension dial(blue or
green) toward a lower number.
, When the needle thread tension is too _oose;
- Turn the needle thread tension dial (blue or
green) toward a higher number.
- Or, turn the upper looper thread tension din!
(orange) toward a lower number.
NEEDLE POSITION
S
STITCH LENGTH 2 - 4
Fe_c Tension D_I
Biue Green Yellow
L_hf[weight 05 4.5 50
M_ium weight &5 5.0 &0
Heavywean 0,5 5,5 7,0
thread
Tops_ Underside
_read thread
Tepsi_ U_ide
'T_e U_emide
33
To Next Page
Loading...
