j
" This machine can sew four types of roiled hems.
o Relied hemming is done by rofting and everedging
the fabric edge,
- Light weght fabrics such as tawn_ voii_ organdy_
crepe etc. perform the best
*_ Reiied hemming is not suited for heavy o_ stff
fabrics
Machine Set Up
- Remove the left needle,
_' Move seam width finger knob to setting R. (See
page 28 )
i Afige left face of seam width finger support plate
with R mark on throat plate by turning seam width
finger knob as required,
• Set stitch length dia_ to "F ' 2" and a fine seam ,#ill
be sewn.
• Needte: Singer Needle #2022 size 80/1! or 90/14
Q Thread: A variety of thread combinations can be
used fo_' rolled hemming.
36
To Next Page
Loading...
