Need help?Do you have a question about the Singer 144W204 and is the answer not in the manual?
General| Brand | Singer |
|---|---|
| Model | 144W204 |
| Category | Sewing Machine |
| Language | English |
Details the features and specifications of the 144w204 and 144w304 sewing machine models.
Specifies the maximum recommended speed for the sewing machines.
Information on needle types, sizes, and how to order them.
Procedure for re-engaging the safety clutch on the sewing hook.
Instructions for adjusting the gib to eliminate wear in the feed eccentric.
Details on setting the spring and collar for the feed eccentric.
Identifies general locations for oiling the sewing machine.
Details on oiling the side wall and base of the machine.
Step-by-step guide to remove the needle bar rock frame rock shaft.
Procedure for adjusting the sewing hook relative to the needle.
Instructions for winding the bobbin on the 144w204 model.
Details on tension adjustment and thread path for bobbin winding.
Procedure for correctly inserting and setting the needle.
Instructions for setting the needle bar when no mark is present.
Procedure for adjusting the feed dog's position.
Steps for replacing the bobbin case and threading it.
Visual guides to identify correct, tight, or loose thread tensions.
Instructions for adjusting the tension of both needle and bobbin threads.
How to raise and lower the presser feet.
Steps to prepare the machine and start sewing.
Procedure for safely removing work from the machine.
Detailed instructions for adjusting the stitch length.
Caution regarding the critical timing between needle and feed dog.
Importance of disengaging plungers before operating the machine.
Detailed steps for threading the needle.
How to set the thread controller spring for optimal action.
Procedure to strengthen or lighten the controller spring action.
Instructions for winding the bobbin on the 144w304 model.
How to adjust the amount of lift for the alternating pressers.
Procedure to adjust the relative lift of vibrating and lifting presser feet.
Detailed steps for correctly timing the sewing hook.
Method to determine the twist of the thread.
Instructions for setting the needle into the needle bar.
Procedure for removing the bobbin and bobbin case.
Steps for removing the sewing hook from the machine.
Procedure for adjusting the height of the feed dog.
Recommendations on oil type and frequency for machine lubrication.
Procedure for removing the connection belt from within the arm.
Aligning timing plate and collar for correct hook and feed timing.
Warning regarding proper handling of the machine belt.
Procedure to adjust the hand-wheel shaft bushing for proper gear engagement.
To Next Page
