59
he ruffle so that the wrong sides are together. If
the facing is to be on the wrong side, place the right
sides of the garment and the ruffle together.
FIG. 62
Piping a Ruffle
Insert the material to be ruffled between the two
blue blades, following the line 2, in Fig. 59. This
FIG. 63
material must not be over
1
1
/
1
inches wide, as
it is carried through the ruffler with the finished
59
the ruffle so that the wrong sides are together. If
the facing is to be on the wrong side, place the right
sides of the garment and the ruffle together.
FIG.
62
Piping
a Ruffle
Insert
the material to be ruffled between the two
blue blades, following the line 2, in Fig. 59.
This
FIG.
(3a
material
must not be over 134 inches wide, as
it
is carried through the ruffler
with
the finished
To Next Page
Loading...
