Need help?Do you have a question about the Singer 153W102 and is the answer not in the manual?
General| Brand | Singer |
|---|---|
| Model | 153W102 |
| Category | Sewing Machine |
| Language | English |
Heavy grade oil recommended for manufacturing machines.
Oil for minimum stain on fabrics, suitable for storage.
Details on thread, motor, gear, and ball bearing lubricants.
Covers using and adjusting specific Singer sewing machine models.
Notes on cylinder bed, compound feed, and high speed capabilities.
Details for the 153K101 heavy duty model with alternating pressers.
Descriptions for 153K102 (four-motion feed) and 153K103 (with pressers).
Details for the 154K101 with two needles and hooks.
Maximum speeds for different machine models, including break-in period.
Information on needle types, sizes, and proper selection criteria.
Illustrates specific oiling points on the front of the machine.
Shows oiling points and adjustments at the back of the machine.
Details oiling points within the cylinder end cover.
Details oiling points located behind the face plate.
Recommended thread sizes for various needle sizes.
Method to determine thread twist direction for proper use.
Step-by-step guide for winding a bobbin correctly.
Instructions for correctly setting the needle in the needle bar.
Illustration of the correct bobbin thread direction.
Instructions for properly threading the bobbin case.
Detailed instructions for the upper thread path through the machine.
Visual example of a perfectly tensioned stitch.
Visual examples of tight and loose needle thread tension.
How to adjust needle and bobbin tensions for balanced stitching.
Adjusting presser foot pressure for even material feeding.
How to use the stitch regulator to control stitch length.
Adjusting the thread lubricator for optimal leather stitching.
Explains the purpose of the thread controller spring.
How to adjust controller spring tension and action.
Correctly setting the needle bar for proper operation.
Setting correct distance between needle and presser bars.
Adjusting lift height of vibrating and lifting presser feet.
Adjusting the hook position relative to the needle for timing.
Procedure for correctly timing the sewing hook with the needle.
Adjusting feed dog height and position for proper feeding.
Adjusting the feed bar mechanism for correct operation.
Adjusting the bobbin case opening mechanism for thread clearance.
Setting stitch length using the feed regulating spindle.
Limiting the maximum stitch length that can be made.
Procedure to remove the needle bar rock frame shaft.
Procedure to re-engage the safety clutch after disengagement.
Steps to remove the arm shaft connection belt from the arm.
Illustrates timing marks for synchronizing hook and feed.
Correct belt replacement and timing for synchronization.
Warning about proper belt handling to prevent damage.
To Next Page
