Need help?Do you have a question about the Singer 211G 155 and is the answer not in the manual?
General| Type | Industrial Sewing Machine |
|---|---|
| Stitch Type | Lockstitch |
| Max Stitch Length | 5 mm |
| Motor | Clutch Motor |
| Operation | Manual |
| Application | Heavy-duty sewing |
| Weight | Approx. 80 lbs (machine head only) |
Details specifications and features of the 211 G 155 model.
Highlights variations of the 211 G 156 model from the 211 G 155.
Specifies maximum speeds and break-in period for new machines.
Guides on attaching components like the oil pan and knee lifter bracket.
Warns about the necessity of lubrication before initial operation.
Identifies required oil type and specific lubrication points on the machine.
Explains how to choose and order the correct Singer needles.
Discusses thread twist and provides a table for matching needle sizes to thread types.
Step-by-step instructions for safely removing the bobbin.
Details on threading and winding thread onto the bobbin.
Instructions on how to correctly place the wound bobbin into the shuttle.
Steps for inserting and tightening the needle in the needle bar.
A detailed guide on how to thread the needle with the upper thread.
Instructions for preparing the machine after threading for initial sewing.
Explains how to adjust the oil flow for thread lubrication.
Details on adjusting both needle and bobbin thread tensions for proper stitch formation.
Describes how to change the stitch length setting.
How to adjust the pressure exerted by the presser feet on the material.
Steps to reset the safety clutch if it has been disengaged.
Instructions on how to operate the reverse feed function on the specific model.
Guidance on adjusting the spring that manages needle thread slack.
How to adjust the rock frame for synchronous or differentiated feed.
Method for checking and setting the correct height of the needle bar.
Detailed steps for adjusting the hook's distance and timing relative to the needle.
Instructions for removing and installing a new hook assembly.
How to adjust the feed dog's position and height for optimal feeding.
Adjusting the clearance for the alternating presser feet mechanism.
Guidance on adjusting the lift height and timing of the alternating presser feet.
How to adjust the eccentric that controls stitch length.
Adjusting the reverse feed for equal stitch length in both directions.
Instructions for replacing the connection belt for the arm shaft.
To Next Page
