Need help?Do you have a question about the Singer 211G156 and is the answer not in the manual?
General| Brand | Singer |
|---|---|
| Model | 211G156 |
| Category | Sewing Machine |
| Language | English |
Explains optimal machine speed based on material and sewing method.
Instructions for mounting the machine in the table and setting up the knee lifter.
Guidance on using Singer Oil Type "C" for regular machine lubrication.
Details for lubricating the hook assembly for different machine models.
Instructions for filling and regulating the oil reservoir for thread lubrication.
Information on recommended Singer needles and how to order them.
Recommendation for using left-twist thread for needle and bobbin.
Procedures for removing, winding, and replacing the bobbin.
Adjusting thread tension, control spring, and tension release mechanisms.
Setting the needle bar rock frame for correct clearance.
Adjusting upper and drop feed synchronization for proper feeding.
Procedures for setting the timing of the hook for different models.
Adjusting the clearance between the needle and hook point.
Setting the needle guard to prevent needle deflection issues.
Adjusting the hook height for proper clearance with the throat plate.
Adjusting the bobbin case opener for correct timing and thread passage.
Setting the vertical position of the needle bar.
Adjusting the presser bar for correct clearance with the throat plate.
Adjusting the lift of the alternating pressers based on material.
Timing and adjusting eccentrics for alternating pressers and feed mechanisms.
Centralizing, lateral, height, and lengthwise settings for the feed dog.
Setting the mechanism for equal stitch length in forward and reverse.
Procedures for removing and installing the hook assembly for specific models.
Procedures for removing and installing the hook assembly for specific models.
Instructions for removing and installing the timing belt.
To Next Page
