Do you have a question about the Singer 211G266 and is the answer not in the manual?
Type | Mechanical |
---|---|
Stitch Type | Straight, Zigzag |
Max Stitch Length | 4 mm |
Operation | Mechanical |
Built-in Needle Threader | No |
Drop Feed | Yes |
Free Arm | Yes |
Included Presser Feet | Buttonhole foot |
Details hook lubrication for specific Singer models.
Details hook lubrication for specific Singer models.
Guide to thread selection and twist for sewing.
Procedure for removing the bobbin from the machine.
Instructions for winding thread onto the bobbin.
Steps for inserting a wound bobbin correctly.
Guide for correctly inserting and setting the needle.
Detailed steps for threading the needle.
Final steps before starting sewing operations.
How to adjust needle thread tension.
How to adjust bobbin thread tension.
Method for adjusting stitch length.
How to adjust presser foot pressure.
Procedure to reengage the safety clutch.
Instructions for using the reverse feed mechanism.
How to adjust the thread controller spring tension.
Procedure for adjusting the tension release mechanism.
Adjusting for synchronous feed.
Adjusting for differentiated feed.
How to adjust the needle bar height.
Adjusting hook relative to needle (distance & timing).
Continued hook adjustment for specific models.
Steps to replace the sewing hook.
Steps to adjust the sewing hook's vertical position.
Setting the correct gap between hook and needle.
How to time the sewing hook correctly.
Procedure for removing bobbin case.
Steps to remove the sewing hook assembly.
Instructions for installing a new sewing hook.
How to adjust the bobbin case opener.
Procedure for timing the bobbin case opener.
Adjusting feed dog position sideways.
Adjusting the vertical height of the feed dog.
How to adjust the height of the presser bar.
Adjusting the lift of alternating presser feet.
Adjusting the feed driving eccentric for stitch length.
Adjusting the reverse feed mechanism for stitch length.
Procedure for replacing the arm shaft connection belt.