Need help?Do you have a question about the Singer 211G766 and is the answer not in the manual?
General| Type | Mechanical |
|---|---|
| Stitch Type | Straight, Zigzag |
| Max Stitch Length | 4 mm |
| Operation | Manual |
| Included Accessories | Needles, Bobbins, Screwdriver |
| Presser Feet | Various |
Instructions for correctly installing the sewing machine head onto the work table.
Guidelines for proper and regular oiling of all machine parts.
Specific procedures for lubricating the hook mechanism for different machine models.
Adjusting the thread controller spring for proper thread tension and slack.
Synchronizing the upper and lower feed mechanisms for consistent feeding.
Setting the correct timing for the hook mechanism relative to the needle.
Adjusting the precise clearance between the needle and the rotating hook point.
To Next Page
