62
To Oil the Ruffler
Occasionally apply a drop of oil to the working
parts of the rafter at each of the places indicated by
the unlettered arrows in Fig. 65. After oiling, open•
ate the ruffier on a waste piece of material to prevent
the oil soiling the work. If the ruffler does not plait
evenly, a drop of oil may remedy the trouble.
Genuine "SINGER" Needles should be
used in "SINGER" Machines.
These Needles and their Containers
are marked with the
Company's Trade-Mark "SIMANCO" 1
Needles in Containers marked
"FOR SINGER MACHINES"
are NOT "SINGER" made needles.
2
62
To Oil the Ruffler
Occasionally
apply
a
drop
of oil to the working
parts of the ruffler at
each
of the
places
indicated hy
the unlettered arrows in Fig. 65. After oiHng,
oper-
ate the ruffler on a waste
piece
of material to
prevent
the oil soiling the work. If the ruffler
does
not plait
evenly,
a
drop
of oil may
remedy
the
trouble.
Genuine
"SINGER'*
Needles should be
used in
**SINGER"
Machines.
These Needles and their Containers
are
marked with the
Company^s Trade-Mark **SIMANCO" 1
Needles in Containers marked
*TOR
SINGER
MACHINES''
are
NOT
"SINGER"
made needles. 2
To Next Page
Loading...
