Previous Page | Next Page
Sewing Machine No. 15
Instructions for
Operating the Machine
Main Parts
To Take out the Bobbin
To Wind the Bobbin
To thread the Bobbin Case
To Replace the Bobbin Case
To Set the Needle
To Thread the Needle
To Prepare for Sewing
To Commence Sewing
To Remove the Work
Tensions
To Regulate the Tensions
To Regulate the Length of Stitch
To Turn a Corner
To Regulate the Pressure on the Material
HINTS
The Belt
Machine Working Heavily
To Avoid Breaking Needles
Breaking of Needle Thread
Breaking of Bobbin Thread
Skipping of Stitches
To Oil the Machine
Instructions for
Using the Attachments
Foot Hemmer -- Hemming
Foot Hemmer -- Hemming and
Sewing on Lace
Foot Hemmer -- Felling
Adjustable Hemmer -- Hemming
Adjustable Hemmer -- Wide Hemming
Beinder -- Binding
Tucker
Ruffler
To Attach the Ruffler to the Machine
To Adjust the Ruffler for Gathering
To Make a Ruffle and Sew it to
a Garment in One Operation
To Ruffle and Sew on a
Facing in One Operation
Piping a Ruffle
To Adjust the Ruffler for Plaiting
To Adjust the Ruffler for
Group Plaiting and Gathering
To Oil the Ruffler
Table of Contents
To Next Page
