Need help?Do you have a question about the Singer 18-22 and is the answer not in the manual?
General| Brand | Singer |
|---|---|
| Model | 18-22 |
| Category | Sewing Machine |
| Language | English |
For all manufacturing sewing machines except where stainless oil is desired.
For manufacturing sewing machines where stainless oil is desired.
For oil-lubricated motors, power tables, transmitters, and general machinery.
For lubricating needle thread in stitching fabrics or leather where required.
Specially prepared grease recommended for gear lubrication on manufacturing sewing machines.
Pure grease designed for lubricating ball bearings of motors and transmitters.
Lists the specific Singer sewing machine models 18-22 through 18-37 covered by this manual.
Provides detailed specifications for each Class 18 machine, including needle, shuttle, and feed types.
Specifies the maximum recommended speed for Class 18 machines and initial operation.
Details how and when to oil the sewing machine for smooth operation and longevity.
Details needle class, variety, and available sizes for Class 18 machines.
Instructions for correctly inserting and tightening needles in specific machine models.
Specifies left/right twist thread usage for needle and bobbin in different machine models.
Step-by-step guide for threading the needle on specific Class 18 machine models.
Step-by-step guide for threading the needle on specific Class 18 machine models.
Instructions on how to attach and use the bobbin winder for winding bobbins.
Detailed steps for threading the bobbin and shuttle for sewing operations.
Instructions on how to correctly insert the shuttle into the race.
Instructions on how to correctly insert shuttles into the race for specific models.
Steps to prepare the machine and threads before starting to sew.
Guidance on how to start sewing after preparing the machine.
Procedure for safely removing the sewn material from the machine.
Instructions for adjusting upper and under thread tensions for perfect stitching.
How to adjust the thumb screw to control the length of the stitch.
Instructions on adjusting the pressure screw for feeding the material.
Procedure to set the needle bar at the correct height for proper stitching.
Instructions for adjusting the feed dog's projection above the throat plate.
Emphasizes using genuine Singer parts and needles for optimal machine performance.
To Next Page
