Need help?Do you have a question about the Singer 1831U and is the answer not in the manual?
General| Brand | Singer |
|---|---|
| Model | 1831U |
| Category | Sewing Machine |
| Language | English |
Limit machine speed to 80% of maximum for the first month of operation.
Refill oil reservoir with new oil after one month and every six months thereafter.
Maintain oil level between the upper and lower indicator lines on the oil gauge.
Check oil cap and confirm oil spray from the nozzle before sewing.
Apply manual oil drops to specific parts for new or idle machines.
Instructions for installing the machine semi-submerged in the table.
Details for installing the machine using the optional fully-submerged kit.
Information on selecting and installing the motor, pulley, and belt for the machine.
Guidance on checking machine rotation direction and setting proper belt tension.
Instructions for attaching the belt cover for safety.
Specifies the recommended type of oil for the machine.
Procedure for filling the oil reservoir and maintaining the correct oil level.
Instructions on how to drain the oil from the reservoir.
Procedure for checking and cleaning or replacing the oil filter.
Information on using silicon oil for thread lubrication and needle coolant.
Instructions on correctly threading the sewing machine to prevent issues like skipping stitches.
Guidance on adjusting the presser foot pressure using the regulating thumb screw.
Procedure for adjusting the stitch length by operating the push button and pulley.
Explanation and steps for adjusting the differential feed ratio for different materials.
Steps for adjusting the overedge bight by positioning the movable knife holder.
Adjusting thread guides and take-up mechanisms based on table settings for different stitch types.
List of checks to perform before and after sewing for optimal performance and longevity.
Specifies the needle height from the throat plate when the needle is highest.
Describes the left looper setting relative to the needle centerline.
Details the right looper setting from the throat plate when the looper is highest.
Setting the double chain stitch looper relative to the needle centerline.
Adjusting feed dog height to protrude from the throat plate for different material types.
To Next Page
