Singer 2282 - Page 9

9 GB/IE/NI
30
Important Safety Instructions
GB / IE
and foot control free from the accumulation of lint, dust, and
loose cloth.
-
required around the sewing machine needle.
- Always use the proper needle plate. The wrong plate can
cause the needle to break.
- Do not use bent needles.
-
needle causing it to break.
- Wear safety glasses.
- Switch the sewing machine off (“0”) when making any adjust-
ment in the needle area, such as threading needle, changing
needle, threading bobbin, or changing presser foot, etc.
- Never drop or insert any object into any opening.
- Do not use outdoors.
- Do not operate where aerosol (spray) products are being used
or where oxygen is being administrated.
- To disconnect, turn all controls to the off (“0”) position, then
remove plug from outlet.
- Do not unplug by pulling on cord. To unplug, grasp the plug,
not the cord.
- The foot control is used to operate the machine. Avoid placing
other objects on the foot control.
- Do not use the machine if it is wet.
- If the supply cord connected with the foot control is damaged,
it must be replac
ed by the manufacturer or its service agent
- This sewing machine is provided with double insulation. Use
only identical replacement parts. See instructions for Servicing
of Double-Insulated Appliances.