Need help?Do you have a question about the Singer 242-1 and is the answer not in the manual?
Instructions for unpacking, setting up the machine, and filling the oil reservoir.
Steps to correctly set the needle bar position relative to other components.
Setting the looper position relative to the needle for correct stitch formation.
Correct positioning of fabric and needle guides relative to feeding cups.
Setting the spreader's front point clearance with the looper.
Centering the uncurler between feeding cups for proper operation.
Instructions for unpacking, setting up the machine, and filling the oil reservoir.
Steps to correctly set the needle bar position relative to other components.
Setting the looper position relative to the needle for correct stitch formation.
Correct positioning of fabric and needle guides relative to feeding cups.
Setting the spreader's front point clearance with the looper.
Centering the uncurler between feeding cups for proper operation.
General| Model | 242-1 |
|---|---|
| Feed Mechanism | Drop Feed |
| Power Source | Electric |
| Built-in Stitches | 1 |
| Voltage | 220V |
| Presser Foot | Standard |
To Next Page
