Need help?Do you have a question about the Singer 242 and is the answer not in the manual?
General| Brand | Singer |
|---|---|
| Model | 242 |
| Category | Sewing Machine |
| Language | English |
The entire assembled arm top cover.
Knob for adjusting the pressure regulator.
Bracket for adjusting the presser bar spring.
Bracket that guides the presser bar.
Spring component of the presser bar mechanism.
The main vertical bar that holds the presser foot.
Screw for adjusting the presser foot tension.
Lever that lifts the presser bar.
Lever that releases thread tension.
The bar that holds and moves the needle.
The main part of the needle clamp.
Thumb screw for the needle clamp.
Adjustable collar for the upper needle bar bushing.
Adjustable screw for the lower needle bar bushing.
Hinge pin for the needle bar vibrating bracket.
The bracket that causes the needle bar to vibrate.
Bracket for the needle bar driving arm hinge.
Hinge stud for the thread take-up lever link.
Lever that moves the thread take-up.
Crank for the thread take-up mechanism.
Link connecting the needle bar to another component.
Stud for the needle bar connecting link.
Screw used to clamp the needle bar.
Upper guide for the sewing thread.
Component for regulating slack thread and guiding tension.
Complete adjustable tension assembly.
Stud that holds the tension discs.
Pin that releases the thread tension.
Spring for the tension mechanism.
Knob for adjusting stitch amplitude and needle position.
Screw for the bight amplitude control lever.
Lever that controls stitch amplitude.
Link connecting to the amplitude control lever.
Arm that drives the needle bar.
The complete needle position selector lever.
The lever that selects needle position.
Lever for selecting discs.
Shaft for the disc driving gear.
Gear that drives the disc.
The wheel used for manual operation.
The fully assembled bobbin winder unit.
Horizontal arm shaft connected to the needle bar crank.
The vertical arm shaft.
Knob for feed actuation and stitch density adjustment.
Dial for controlling stitch length and buttonholer.
Complete buttonholer and feed regulator cam.
Assembly for the feed regulator cam.
Complete buttonholer feed regulator cam.
The complete feed regulator cam.
The cam for the feed regulator.
Mounting bracket for the feed regulator control arm.
Feed regulator assembly with a set screw.
Connection component for the feed fork.
Connecting rod for the feed lifting rock shaft.
The rotating hook assembly including the bobbin case.
The main rotating hook mechanism.
The case that holds the bobbin.
Pulley for belt drive on the rotating hook.
Belt that drives the rotating hook.
Component for adjusting belt tension.
Shaft of the feed system.
Bar component of the feed system.
Dog component that moves the fabric.
Rock shaft that lifts the feed mechanism.
Plate that extends the sewing machine bed.
Component that holds the lower thread.
The part that attaches the presser foot to the machine.
Standard presser foot plate that snaps on.
Standard throat plate for the sewing machine.
Throat plate for straight stitch sewing.
Presser foot for specific sewing operations.
Presser foot designed for sewing buttons.
Presser foot designed for sewing zippers.
Presser foot plate for buttonholes, snaps on.
Snap-on presser foot plate for straight stitches.
Alternative snap-on presser foot plate for straight stitches.
The specific motor unit model WZC-3.
To Next Page
