Singer 29-4 User Manual

Overview of the Singer Model 29-4 sewing machine's features and intended use.

Instructions on how to start and operate the sewing machine using the treadle.

Guidance on selecting appropriate needles and thread sizes for the machine.

Step-by-step instructions for removing the bobbin from the shuttle.

Procedure for threading the shuttle with the bobbin and thread.

Instructions for correctly placing the threaded shuttle back into the machine.

Guidance on how to properly insert and secure the needle in the needle bar.

Detailed steps for threading the needle using the provided tools and machine parts.

Instructions on where and how to oil the sewing machine for optimal performance.

Steps to ready the machine and material for the initial stitch.

Instructions on starting the sewing process once the machine is prepared.

Procedure for safely detaching the completed work from the sewing machine.

Explanation of stitch formation and how thread tensions affect stitch quality.

Guidance on adjusting upper and under thread tensions for optimal stitching.

Technique for maneuvering the machine to sew corners and curves.

Instructions for adjusting the stitch length using the stitch regulator.

Method for adjusting the pressure applied by the feeding foot to the material.

Procedure for adjusting how high the feeding foot lifts off the fabric.

How to alter the direction of material feed for stitching.

Key guidelines for maintaining correct operation and preventing damage.

Advice on checking and adjusting the drive belt for proper tension.

Solutions for a machine that runs hard or stiffly after disuse.

Tips to prevent needles from breaking during operation.

Common causes for the upper thread breaking and how to fix them.

Reasons for the under thread breaking and corrective actions.

Troubleshooting steps for when the machine skips stitches.