Need help?Do you have a question about the Singer 29K70 and is the answer not in the manual?
General| Brand | Singer |
|---|---|
| Model | 29K70 |
| Category | Sewing Machine |
| Language | English |
Regulates machine speed for different types of work for optimal performance and power.
Step-by-step guide on starting and operating the sewing machine using the treadle and balance wheel.
Instructions for correctly inserting and positioning the needle in the needle clamp for proper stitching.
Detailed steps for threading the needle for standard sewing operations.
Procedure for threading the needle specifically for darning purposes.
Steps to safely remove the bobbin from the shuttle assembly.
Explanation of the stop motion device for winding bobbins without operating the main machine.
Guide on how to properly wind thread onto the bobbin using the winder.
Instructions for threading the shuttle correctly for sewing.
Procedure for reinserting the threaded shuttle into its correct position in the machine.
Steps to prepare the machine and thread before starting to sew.
Guide on how to start sewing, including material placement and initial operation.
Instructions on how to correctly remove finished work from the machine.
Guidance on adjusting needle and shuttle thread tensions for optimal stitch quality.
Details on adjusting the tension of the take-up lever for consistent thread control.
How to adjust the stitch regulator to change the length of the stitches.
Instructions for adjusting the pressure applied to the material by the feeding foot.
Technique for turning corners smoothly while sewing.
Adjusting the vertical movement of the feeding foot for different materials.
Essential lubrication points and procedures for maintaining the sewing machine and its stand.
Troubleshooting steps for a machine that operates with excessive resistance or friction.
Guidance on checking and maintaining the correct tension of the drive belt.
Tips and checks to prevent needles from breaking during operation.
Common causes and solutions for the upper thread breaking during sewing.
Troubleshooting for issues causing the under thread (shuttle thread) to break.
Causes and remedies for skipped stitches, including needle and thread setup.
Advice for sewing tough materials like old leather, including needle and stitch recommendations.
Detailed procedure for adjusting the take-up lever travel for mechanics and adjusters.
Guide for disassembling, examining, and reassembling parts within the machine's rack box.
Steps for safely removing the entire rack box assembly from the machine head.
Ensuring the eccentric screw is correctly positioned for shuttle timing.
Explanation of why using genuine Singer needles is crucial for optimal stitching results.
To Next Page
