Singer 3333 - Inserting the Bobbin

GETTING READY TO SEW
13
2
Inserting the Bobbin
B
A
1
⚠ Turn power switch off before inserting or removing the bobbin.
1. When inserting or removing the bobbin, the needle and
presser foot must be fully raised.
2. Remove the bobbin cover plate and bobbin.
3. Insert the bobbin in the bobbin case with the thread
running in a counterclockwise direction (arrow).
4. Pull the thread through the slit (A).
5. :LWKD¿QJHUKHOGJHQWO\RQWRSRIWKHEREELQSODFH
thread into guides as shown.
6. To cut off excess thread pull it toward you to cut it with
the cutter at point (B). Replace the bobbin cover plate.