Electrical Information (Cont'd)
34
Sewing Light
FINGER GRIP
The built-in sewing light is located
beneath the machine arm. It is
turned on or off by the light switch
located under the stitch length
lever.
To Change Bulb
• Switch light off.
• Pull light down by finger grip
and hold in down position.
• Release hold and light will return
to normal position.
To Remove Bulb. Press bulb intosocket and
turn it in " unlock" direction, as shown, and
withdraw.
To Replace Bulb. Press bulb into socket with
bulb pin in slot and turn it in " lock"
direction, as shown.
LOCKS
UNLOCKS
To Next Page
Loading...
