Need help?Do you have a question about the Singer 500 SERIES and is the answer not in the manual?
General| Brand | Singer |
|---|---|
| Model | 500 SERIES |
| Category | Sewing Machine |
| Language | English |
Parts for the arm top cover, including screws and guides.
Components for the bobbin winder, such as discs and springs.
Components for the arm top cover, thread guides, and spool pins.
Parts for the bobbin winder and associated components like stop screws.
Screws, brackets, and fasteners for machine frame and mounting.
Parts for the control panel and face plate, including screws and fasteners.
Components for control panels and side covers, including screws.
Parts for arm end cover plates, including fixing studs and plates.
Various configurations of arm end cover plates based on voltage and region.
Arm end cover plates and electrical data plates for different regions and voltages.
Electrical data plates and various cover plate components.
Parts for the bed, including grommets, pulleys, cover plates, and legs.
Components for the bed end cover plate and cushion.
Parts for the bed extension locking lever system.
Various bed cover plates and related screws and cushions.
Specific bed end cover plates based on color specifications.
Components for the arm and bed assemblies, including various part numbers and specifications.
Components for regulating the presser bar pressure and its follower.
Parts for the presser bar lifter mechanism and bushing.
Components for the presser foot and shank, including screws.
Parts for the thread tension mechanism, including levers, guides, and studs.
Components for the tension indicator assembly, including flanges and adaptors.
Parts for the needle bar, clamping, and related mechanisms.
Parts for the needle bar rocker, connecting studs, and links.
Parts for the horizontal arm shaft, including bushings and collars.
Components for the arm shaft and thread take-up lever.
Parts for the needle bar rocker driving arm and follower.
Components for the blindstitch disc and its actuating dial.
Parts for the bight amplitude control lever and related screws.
Components for the disc driving gear and retaining rings.
Parts for the needle position selector and bight amplitude bracket.
Complete feed regulator mechanism and its sub-components.
Parts for mounting the feed regulator mechanism, including screws and retainers.
Dials and knobs for the feed regulator, with variations.
Screws, retainers, and pins for mounting the feed regulator.
Components for the feed regulator cam and its mounting brackets.
Parts for the clamp stop motion system, including bushings and washers.
Complete hand wheels and clutch springs for various models.
Screws and plates for the hand wheel bobbin winder drive.
Parts for the throat plate, position pins, and bed slide.
Components for the rotating hook bobbin case and its plates.
Components for belt tensioning and the rotating hook assembly.
Parts for the feed dog and feed bar mechanisms, including guide pins.
Parts for the feed lifting fork and feed regulator shaft assemblies.
Parts for the feed drive shaft, gears, and related regulator components.
Parts for feed lifting fork hinge studs and feed drive shaft components.
Parts for the rotating hook drive shaft, bevel gears, and collars.
Various control dials, washers, and retainers for the feed regulator.
Components for the cam follower and the complete mechanism assembly.
Parts for the machine's lighting system and retaining clips.
Various ENK8 series motor assemblies with specific part numbers.
Parts for motor mounting, brushes, and associated hardware.
Electrical switches and light lead clamping clips.
Components for switch modules and capacitors.
Various foot controllers and supply leads for the machine.
Specialty feet like zipper, blindstitch, and button feet.
Packs of needles and complete attachment sets for different regions.
Feet for straight stitch, hemming, and seams.
Feet for specialized tasks like darning, embroidery, and gathering.
To Next Page
