Singer 66-1 - Page 15

26
Under
Braider
(No.
35963)
Substitute
the
quilter
foot
for the
regular
presser
foot.
Attach
the
under
braider
as
directed for
the
shirring
plate;
see
page
24.
The
pattern
or design
to
be
braided
must
be
stamped
or traced
on
the wrong side of
the
goods.
Pass the end of the braid back
through
the
guides
in the
under braider and under the
needle.
f
EMBROIDERY
AND DARNING
While
embroidery
and
darning can be done
on the
machine
when threaded
for regular
sewiilg,
the use
of feed
cover
plate
No.
32622
is
recommended,
as
movable
contact
with the
feed
in
some
cases
might interfere
with the
handling of the work.
Do not
change
the
adjustment
of
the
feed
dog
in
any way
as it
is
essential
that
its
position
should
remain as
originally
fixed.
When
feed cover No.
32622
is
used
it
is necessary
to
lead the
upper
thread
through
the eye
in
the thread
regulat or at
the left of
the
tension
discs,
and
not
under
the thread
regulator.
See
Fig.
32,
page
27.
With
this
exception the threading
of the
machine
is
the
same
as for
regular sewing.
Remove
the
presser
foot and let
down the
presser
bar
lifter
to
restore the
tension
on
the
upper thread,
which is
released
and
inoperative
when the lifter
is
raised.
To attach
the
feed
cover
plate
draw
to the
left
the
slide that
covers the bobbin
case,
then insert, the downwardly
projecting
hooks
on
the
cover
plate
under
the
edge
of the throat
plate
and
27
push
to
the
right.
After
bringing
the
hole
at
the
right
of the
cover
plate
in
line
with
the
hole
in
the throat
plate,
press
the cover
into
position,
and
close
the
slide
covering
the
bobbin
case. See
Fig.
32.
Flc. 32.
Mlculxp
TunpaDED FoR
EUBnoIDERY
AND
DnnxrNc
Feed
cover
plates
are
not included
in
the
regular
sets
of
attachments;
they
are
on sale at
all
Singer
shops
at
the
priee
of
ten cents
each.
Instructions
for
making
embroidery
are
eontained
in the
"
Singer
Instructions
for
Art
Embroidery,"
sold
by
Singer
Sewing
Machine
Company
at a
reasonable
price.
Frc.
31