Need help?Do you have a question about the Singer 660A202 and is the answer not in the manual?
General| Brand | Singer |
|---|---|
| Model | 660A202 |
| Category | Sewing Machine |
| Language | English |
Overview of the 660A series machines, detailing their high speed and operational design.
Detailed technical specifications for 660A1, 660A2, and 660A3 sewing machines.
Instructions for setting up the sewing machine, including table and pulley mounting.
Guidance on pulley installation, correct rotation, and optimal operating speed.
Instructions for oiling various parts of the machine for optimal performance and longevity.
Procedure for testing and ensuring proper lubrication of the sewing hook.
Guidance on needle selection, insertion, and adjusting presser foot pressure.
Balancing needle and bobbin thread tension for optimal stitching quality.
Step-by-step guide for correctly threading the needle.
Instructions for inserting, removing, and winding the bobbin.
Steps for preparing, starting, and removing work, plus turning corners.
Instructions for removing lint and dust from the machine's parts.
Adjusting the feed and hook mechanisms for correct synchronization.
Setting needle bar bushing height and adjusting feed mechanism eccentrics.
Ensuring the hook point is centered with the needle at the correct timing stage.
Adjusting the height and tension of the check spring for proper thread control.
Instructions for centralizing, setting height, and leveling the feed dog.
Adjusting hook, needle bar, and presser bar for optimal operation.
Procedure for setting the desired stitch length.
Ensuring feed dog centralisation, height, and level for proper fabric feeding.
Ensuring correct clearance between the needle and the rotating hook point.
Adjusting the position finger for proper thread passage.
Instructions for removing and reinstalling the needle bar.
Steps for removing and reinstalling the presser bar.
Checking clearances related to the presser foot and bar.
Verifying correct machine setting for zero stitch length.
Instructions for removing and replacing arm shaft, connection belt, and feed shafts.
Detailed steps for removing and reinstalling the arm shaft.
Instructions for replacing the connection belt for the arm shaft.
Procedures for removing and replacing the feed lifting and feed rock shafts.
Steps for removing and reinstalling the hook driving shaft, including timing.
Detailed instructions for removing and reinstalling the needle bar.
Detailed steps for removing and reinstalling the presser bar.
Procedure for removing and reinstalling the entire thread take-up mechanism unit.
To Next Page
