Singer 66-18 - Page 38

36
ATTACHING
THE BINDER
TO THE
MACHINE
Raise the
needle to its
highest
position
and
remove
the
prcsser
foot from the
macliine
by loosening the
I'rc. 32
thumb
screu' n'hich holds
it in
place.
Compare the
foot of the
Binder
and
tlie
presser
foot
and
you
rvill
see that they are attached to
the
machine
in
the
same
mannei. Attach
the
Binder
to
the
pres-ser
bar.
Turn the balancc rvheel slolrly
toward
you
to make sure that the
Binder is
properly
attached to
the
bar and that, the
needle
goes
through
the center of the
necdle
hoie.
Insert
the
Binding in
the
Binder
Cut the
binding to a long
point
to
left,
as shol'n. Insert the
pointed
end
into
the
Binder
scroll
(Fig.
34)
until the
pointed
end comes through
the lorrcr
end
of the scroll.
Frc. 33
Ccrrrxc Por-vr
ox Btr-otsc