EasyManua.ls Logo

Singer 6SS User Manual

Singer 6SS
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image

Other manuals for Singer 6SS

Question and Answer IconNeed help?

Do you have a question about the Singer 6SS and is the answer not in the manual?

Singer 6SS Specifications

General IconGeneral
TypeMechanical
Built-in Stitches6
SpeedUp to 750 stitches per minute
Model6SS
Presser Feet IncludedAll-Purpose Foot, Buttonhole Foot, Zipper Foot
Warranty25-year limited warranty

Summary

Stitch Ratio and Penetration Adjustment

Stitch Ratio Settings

Explains stitch ratios 1:1 and 2:1, and how to change between them using the ratio lever.

Penetration Dial Adjustment

Instructions on how to turn the penetration dial to achieve desired stitch penetration.

Machine Oiling and Maintenance

Oiling Locations and Procedure

Identifies specific oiling points marked in red and outlines the lubrication process.

Cover Removal for Oiling

Details how to remove the machine cover by loosening a knurled knob.

Machine Mounting and Setup

Securing Machine to Table

Instructions for fastening the machine to a table using a felt pad and tightening bolts.

Motor and Pulley Specifications

Recommended motor horsepower, RPM, and pulley sizes for different sewing applications.

Handwheel Rotation Direction

Specifies the correct clockwise direction of the handwheel's rotation.

Needle Selection and Setting

Needle Data Charts

Provides needle size data for short point (Cat. 3690) and long point (Cat. 7425) needles.

Needle Size to Material Guide

Recommends appropriate needle sizes based on the type of fabric being sewn.

Needle Setting and Alignment

Detailed steps for removing, replacing, and correctly aligning the needle with the rib.

Testing Stitch Ratio Operation

Procedure to test if the machine is correctly set for 2:1 and 1:1 stitch ratios.

Threading and Tension Adjustment

Threading Path Guide

Step-by-step instructions for threading the machine through designated guides (A-E).

Recommended Thread Length

Specifies the appropriate amount of thread to leave past the needle hole.

Knee Lifter Adjustment

Instructions for adjusting the knee lifter mechanism for user comfort.

Setting Thread Tension

Guidance on adjusting thread tension to prevent puckering or loose stitches.

Related product manuals