Light Bulb Replacement:
Return to Table of Contents
1. To change the light bulb, locate the light lens. Picture (1).
2. Pull the light lens down, and push the light bulb inwards and give it a twist counter clockwise. Picture (2).
3. Install in the reverse order. Note, use only light bulbs approved for sewing machines, or have a rating of 15watts.
Believe it or not, I’ve seen auto bulbs, Christmas lights stuck in these units. Also look for any discoloration of the plastic
lens area. Pretty good indication that the wattage may be too high.
1
2
1. Locate light socket lens and pull downward
2. Push bulb inward and give a twist counter clockwise
3. Inspect lens for discoloration
3
To Next Page
